How to access the PLDT Home Fibr Router’s Full admin account? It’s been a while since PLDT sent emails or letters to their subscribers, informing them about their policy changes. The letter stated that to access the root admin of PLDT Home Fibr’s Modem/Router. The subscriber must sign the waiver first.
Advertisements
However, many are skeptical about signing the waiver, that includes me. It is simply because the waiver is so advantageous for PLDT. You read it
PLDT Fibr ONU Users
The policy change may not affect all PLDT subscribers because not all subscribers are advanced users that care about the Modem’s root access or PLDT Fibr Router adminpldt. However, for those advanced users, it’s a significant loss.
As one of the advanced users that struggle to access the PLDT Home Fibr adminpldt account, I tried to call PLDT for help to access the PLDT Fibr’s root admin again but to no avail.
Advertisements
So, I did some research and found a workaround to access the PLDT Fiberhome ONU Router’s adminpldt without signing the PLDT Waiver. These are the steps you need to follow:
⚠ Important Note: This will work only on PLDT Fiberhome ONU Routers.
Access PLDT Fibr adminpldt
First, we need the following:
- Know your PLDT Fiberhome modem-router’s software version ➔ https://youtube.com/shorts/aPmmrCQ0hcc.
- The correct URL ➔ (http://192.168.1.1/fh) of the PLDT Fiberhome Modem router.
- PLDT Superadmin username and password according to your router’s software version.
- PLDT adminpldt username and password based on your router’s firmware or software version.
⚠ Please take note of the information on the list above. We will need that URL, usernames, passwords, and the correct software version of your router.
Advertisements
➊ Now, open a web browser; in the web address bar, type 192.168.1.1/fh, or click this 192.168.1.1/fh to open the PLDT web login page. As shown in the image below.
➋ Input the superadmin username and password according to your router’s software version, ➔ click the login button, or hit enter.
Enable Web Admin Switch
➌ Inside Device Management, select ➔ Debug Switch and Enable Web Admin Switch. Click ➔ Apply to save the changes ➔ Logout.
➍ In the web address bar, type or edit the URL from 192.168.1.1/login.html to 192.168.1.1/fh and Enter↩. Ensure that what you see on the web login page is Administrator and not Username, retype the URL 192.168.1.1/fh if necessary.
➎ On the login page, input adminpldt in the Administrator and the password according to your router’s software version. If you don’t know the password, check this link PLDT default adminpldt passwords. Then click login.
Congratulations!😉 You just accessed the adminpldt account of your PLDT Fibr Modem/Router. Do you find this post helpful? You are free to share this with your friends that encounter the same issue as yours.
⚠ Important: To access the adminpldt account, please always enable the Web Admin Switch first.
If you fail to do so, you will not be able to access your adminpldt account. Instead, you will encounter the “Admin Account Unavailable” error.
Lastly, please keep in mind that accessing the adminpldt account of your PLDT Home Fibr also means responsibility. Please do not abuse it; know your limits. If you are not the owner or the paying PLDT subscriber, you should restrain yourself from getting access to it.
Shem says
Hi po sir, wala pa po bang update sa 2nd password?
I.C Tiempo says
Hello po Sir, if the first password works the second password should also work. Maliban nalang kung napalitan yan bago ang update.
lagatack says
sir kahit mapasok ung web admin switch page blanko nalang siya ? any update TIA
tito says
i canot access my root im usin onu hg6245d thank you in advance
I.C Tiempo says
Can you provide the software version?
yancie jumilla says
how about HG8145V poooo? pleaseeee. Really need to fix this huhu 🙁
Patience says
SEPT 2019,
Sir good day,
Software Version RP2631
Device Model AN5506-04-FA
Usernames: f~i!b@e#r$h%o^m*esuperadmin
Passwords: s(f)u_h+g|u
Usernames: adminpldt
Passwords: z6dUABtl270qRxt7a2uGTiw
and
adminpldt
6GFJdY4aAuUKJjdtSn7dC2
any help/ update?
Patience says
notworking… any update sir?
I.C Tiempo says
For Rp2631 version, kindly see the link within the post.
I.C Tiempo says
As of this time below credentials still works. I personally tested it on my router today.
Usernames: f~i!b@e#r$h%o^m*esuperadmin
Passwords: s(f)u_h+g|u
Usernames: adminpldt
Passwords: z6dUABtl270qRxt7a2uGTiw
Ricardo Mercado says
Boss napagana ko yung 1st login/pw na enable ko na yung “web admin switch”, pero yung 2nd login/pw ayaw gumana. Na try ko na rin restore all ayaw parin.
(software version RP2602, Model HG6245D).
I.C Tiempo says
I will be posting this week on how to see your password using telnet.
PG Olivier Bulfa says
any updates sir?
I.C Tiempo says
Hello, please see the RP2631 update.
Carmencito says
Still unable to access hg6245d with software version RP2602 po