How to access the PLDT Home Fibr Router’s Full admin account? It’s been a while since PLDT sent emails or letters to their subscribers, informing them about their policy changes. The letter stated that to access the root admin of PLDT Home Fibr’s Modem/Router. The subscriber must sign the waiver first.
Advertisements
However, many are skeptical about signing the waiver, that includes me. It is simply because the waiver is so advantageous for PLDT. You read it
PLDT Fibr ONU Users
The policy change may not affect all PLDT subscribers because not all subscribers are advanced users that care about the Modem’s root access or PLDT Fibr Router adminpldt. However, for those advanced users, it’s a significant loss.
As one of the advanced users that struggle to access the PLDT Home Fibr adminpldt account, I tried to call PLDT for help to access the PLDT Fibr’s root admin again but to no avail.
Advertisements
So, I did some research and found a workaround to access the PLDT Fiberhome ONU Router’s adminpldt without signing the PLDT Waiver. These are the steps you need to follow:
⚠ Important Note: This will work only on PLDT Fiberhome ONU Routers.
Access PLDT Fibr adminpldt
First, we need the following:
- Know your PLDT Fiberhome modem-router’s software version ➔ https://youtube.com/shorts/aPmmrCQ0hcc.
- The correct URL ➔ (http://192.168.1.1/fh) of the PLDT Fiberhome Modem router.
- PLDT Superadmin username and password according to your router’s software version.
- PLDT adminpldt username and password based on your router’s firmware or software version.
⚠ Please take note of the information on the list above. We will need that URL, usernames, passwords, and the correct software version of your router.
Advertisements
➊ Now, open a web browser; in the web address bar, type 192.168.1.1/fh, or click this 192.168.1.1/fh to open the PLDT web login page. As shown in the image below.
➋ Input the superadmin username and password according to your router’s software version, ➔ click the login button, or hit enter.
Enable Web Admin Switch
➌ Inside Device Management, select ➔ Debug Switch and Enable Web Admin Switch. Click ➔ Apply to save the changes ➔ Logout.
➍ In the web address bar, type or edit the URL from 192.168.1.1/login.html to 192.168.1.1/fh and Enter↩. Ensure that what you see on the web login page is Administrator and not Username, retype the URL 192.168.1.1/fh if necessary.
➎ On the login page, input adminpldt in the Administrator and the password according to your router’s software version. If you don’t know the password, check this link PLDT default adminpldt passwords. Then click login.
Congratulations!😉 You just accessed the adminpldt account of your PLDT Fibr Modem/Router. Do you find this post helpful? You are free to share this with your friends that encounter the same issue as yours.
⚠ Important: To access the adminpldt account, please always enable the Web Admin Switch first.
If you fail to do so, you will not be able to access your adminpldt account. Instead, you will encounter the “Admin Account Unavailable” error.
Lastly, please keep in mind that accessing the adminpldt account of your PLDT Home Fibr also means responsibility. Please do not abuse it; know your limits. If you are not the owner or the paying PLDT subscriber, you should restrain yourself from getting access to it.
Lagatack says
August 25, 2019 at 6:00 pm
Patched again, di na ma access web admin enabled tab 🙁
I.C Tiempo says
Yes, may update na! If nagbasa ka makikita mo ang link below.
Dale Marie Hipolito says
D po ako maka access sa 192.168.1.1 para sa pldtfibr admin po its says na my connection is in private daw
Ano po dapat gawin.salamat po
I.C Tiempo says
Please read the post, please, please.Kung binasa niyo ang post may link kayong makikita papunta sa bagong update.
kevs says
Hi po, hindi na po ata gumagana to,:
First PLDT Fibr username: fiberhomesuperadmin
First PLDT Fibr password: sfuhgu
Any update po sa username and or password ?
Salamat
I.C Tiempo says
Please read the post, please, please, please. Kung binasa niyo ang post, makikita niyong may update at may link. Hayssss! Buhay nga naman.
How to access PLDT Fibr Router RP2631 version
kevs says
Sensya po at bagohan lang po dito sa thread. Akala ko kasi for router model RP2631 lang tong info nato. Ibang model kasi sakin. I hope you’d be more kind when replying back. Be professional po, word of advise ko lang..salamat…
I.C Tiempo says
I am sorry if you found it a bit rude but you have also to understand that everything is already in the post. Ang gawin nalang ay basahin, humingi kayo ng update, pero more than a month ng may updte at link within the article. Ibig sabihin hindi niyo binasa ang buong article tapos mag reklamo na hindi gumana. Tao lang po, I receive the same complains all the time, kasi hindi nagbasa, scrolling lang ang ginagawa. I must admit, minsan it pissed me off. I apologize if I hurt you but don’t take it personally bro.
Ramil says
Hi po second user and password is not working my router version is RP2658
I.C Tiempo says
This is for RP2631, I will post RP2658 if may nakita na akong solution.
John Dale Reyes says
Sir do you think kayang i-enable ung 3 LAN ports ng Fibr Modem
right now what I can use lang is ung LAN Port#1
I.C Tiempo says
Yes, you can as long as you can access the adminpldt.
Jem Perez says
Good day sir, di ko po maaccess using the fiberhomesuperadmin account, lagi pong username or password incorrect.
Device Model AN5506-04-F
Software Version RP2613
Thank you
one shot says
help. second password does not work anymore. i just want to access my security settings in the web . huhuhu
stariray says
mine too
Lagatack says
Blank na ung web admin enable tab, sad
I.C Tiempo says
You may try to restart your modem router for about 20 seconds.