How to access the PLDT Home Fibr Router’s Full admin account? It’s been a while since PLDT sent emails or letters to their subscribers, informing them about their policy changes. The letter stated that to access the root admin of PLDT Home Fibr’s Modem/Router. The subscriber must sign the waiver first.
Advertisements
However, many are skeptical about signing the waiver, that includes me. It is simply because the waiver is so advantageous for PLDT. You read it
PLDT Fibr ONU Users
The policy change may not affect all PLDT subscribers because not all subscribers are advanced users that care about the Modem’s root access or PLDT Fibr Router adminpldt. However, for those advanced users, it’s a significant loss.
As one of the advanced users that struggle to access the PLDT Home Fibr adminpldt account, I tried to call PLDT for help to access the PLDT Fibr’s root admin again but to no avail.
Advertisements
So, I did some research and found a workaround to access the PLDT Fiberhome ONU Router’s adminpldt without signing the PLDT Waiver. These are the steps you need to follow:
⚠ Important Note: This will work only on PLDT Fiberhome ONU Routers.
Access PLDT Fibr adminpldt
First, we need the following:
- Know your PLDT Fiberhome modem-router’s software version ➔ https://youtube.com/shorts/aPmmrCQ0hcc.
- The correct URL ➔ (http://192.168.1.1/fh) of the PLDT Fiberhome Modem router.
- PLDT Superadmin username and password according to your router’s software version.
- PLDT adminpldt username and password based on your router’s firmware or software version.
⚠ Please take note of the information on the list above. We will need that URL, usernames, passwords, and the correct software version of your router.
Advertisements
➊ Now, open a web browser; in the web address bar, type 192.168.1.1/fh, or click this 192.168.1.1/fh to open the PLDT web login page. As shown in the image below.
➋ Input the superadmin username and password according to your router’s software version, ➔ click the login button, or hit enter.
Enable Web Admin Switch
➌ Inside Device Management, select ➔ Debug Switch and Enable Web Admin Switch. Click ➔ Apply to save the changes ➔ Logout.
➍ In the web address bar, type or edit the URL from 192.168.1.1/login.html to 192.168.1.1/fh and Enter↩. Ensure that what you see on the web login page is Administrator and not Username, retype the URL 192.168.1.1/fh if necessary.
➎ On the login page, input adminpldt in the Administrator and the password according to your router’s software version. If you don’t know the password, check this link PLDT default adminpldt passwords. Then click login.
Congratulations!😉 You just accessed the adminpldt account of your PLDT Fibr Modem/Router. Do you find this post helpful? You are free to share this with your friends that encounter the same issue as yours.
⚠ Important: To access the adminpldt account, please always enable the Web Admin Switch first.
If you fail to do so, you will not be able to access your adminpldt account. Instead, you will encounter the “Admin Account Unavailable” error.
Lastly, please keep in mind that accessing the adminpldt account of your PLDT Home Fibr also means responsibility. Please do not abuse it; know your limits. If you are not the owner or the paying PLDT subscriber, you should restrain yourself from getting access to it.
Oliver says
September 20, 2019 at 3:34 pm
Doesn’t work for me
PLDT Fibr Model : AN5505-04-FA
I.C Tiempo says
What is the error?
John Paul says
Hi sir ask ko lang di kase gumagana sken gamit kong router is AN5506-04-F with software version of RP2613(00.00) pa help naman sir thanks
I.C Tiempo says
sa pagkaka-alam ko ka tropa ay adminpldt at 1234567890 ang gamit ng old version. Update ko nalang toh, just in case may makita na akng solution.
Roger says
Thank you so much sir!
I.C Tiempo says
You are welcome.
jacie says
[* Shield plugin marked this comment as “Pending Moderation”. Reason: Human SPAM filter found “login.htm” in “comment_content” *]
Pano ba ung website pag nilalagay sa address nagbabago https://192.168.1.1/login.html instead na /fh?
I.C Tiempo says
It’s a redirection. You don’t have to worry about it. As long as everytime you log in, just type the 192.168.1.1/fh. All of us got redirected to login.html.
johnny says
The second password did not work for me only the first one.
I.C Tiempo says
You may try to check this: How to access PLDT Fibr using Telnet?
JB says
telnet says password is : z6dUABtl270qRxt7a2uGTiw but still can’t log in
I.C Tiempo says
Hello JB, make sure to re-type the 192.168.1.1/fh before typing the second username and password. If you copy and paste, see to it that there are no blank spaces included.
JB says
Did it many times sir. I tried to type it. Still the same 🙁
I.C Tiempo says
Hhmm? That’s odd. Just give it some time, relax and chill. Wait for tomorrow. I know you are missing something but you can’t figure it out if you are overwhelmed by your disappointment. Before doing the step by step guide again, restart your router, clear your browser’s cache or delete all of your browsing histories, it should be “All time” if you are using chrome. After you logged-out from “debug switch, change the https://192.168.1.1/login.html to 192.168.1.1/fh. You will be redirected back to https://192.168.1.1/login.html but that’s fine. Then input your second username and passwords.
Jun says
Hi po,
Any updates on Huawei HG8145V Router username and password?
Thanks