How to access the PLDT Home Fibr Router’s Full admin account? It’s been a while since PLDT sent emails or letters to their subscribers, informing them about their policy changes. The letter stated that to access the root admin of PLDT Home Fibr’s Modem/Router. The subscriber must sign the waiver first.
Advertisements
However, many are skeptical about signing the waiver, that includes me. It is simply because the waiver is so advantageous for PLDT. You read it
PLDT Fibr ONU Users
The policy change may not affect all PLDT subscribers because not all subscribers are advanced users that care about the Modem’s root access or PLDT Fibr Router adminpldt. However, for those advanced users, it’s a significant loss.
As one of the advanced users that struggle to access the PLDT Home Fibr adminpldt account, I tried to call PLDT for help to access the PLDT Fibr’s root admin again but to no avail.
Advertisements
So, I did some research and found a workaround to access the PLDT Fiberhome ONU Router’s adminpldt without signing the PLDT Waiver. These are the steps you need to follow:
⚠ Important Note: This will work only on PLDT Fiberhome ONU Routers.
Access PLDT Fibr adminpldt
First, we need the following:
- Know your PLDT Fiberhome modem-router’s software version ➔ https://youtube.com/shorts/aPmmrCQ0hcc.
- The correct URL ➔ (http://192.168.1.1/fh) of the PLDT Fiberhome Modem router.
- PLDT Superadmin username and password according to your router’s software version.
- PLDT adminpldt username and password based on your router’s firmware or software version.
⚠ Please take note of the information on the list above. We will need that URL, usernames, passwords, and the correct software version of your router.
Advertisements
➊ Now, open a web browser; in the web address bar, type 192.168.1.1/fh, or click this 192.168.1.1/fh to open the PLDT web login page. As shown in the image below.
➋ Input the superadmin username and password according to your router’s software version, ➔ click the login button, or hit enter.
Enable Web Admin Switch
➌ Inside Device Management, select ➔ Debug Switch and Enable Web Admin Switch. Click ➔ Apply to save the changes ➔ Logout.
➍ In the web address bar, type or edit the URL from 192.168.1.1/login.html to 192.168.1.1/fh and Enter↩. Ensure that what you see on the web login page is Administrator and not Username, retype the URL 192.168.1.1/fh if necessary.
➎ On the login page, input adminpldt in the Administrator and the password according to your router’s software version. If you don’t know the password, check this link PLDT default adminpldt passwords. Then click login.
Congratulations!😉 You just accessed the adminpldt account of your PLDT Fibr Modem/Router. Do you find this post helpful? You are free to share this with your friends that encounter the same issue as yours.
⚠ Important: To access the adminpldt account, please always enable the Web Admin Switch first.
If you fail to do so, you will not be able to access your adminpldt account. Instead, you will encounter the “Admin Account Unavailable” error.
Lastly, please keep in mind that accessing the adminpldt account of your PLDT Home Fibr also means responsibility. Please do not abuse it; know your limits. If you are not the owner or the paying PLDT subscriber, you should restrain yourself from getting access to it.
Luis says
July 5, 2019 at 1:31 am
Lumalabas Username or Password error nung nagcopy and paste ako ng
Username: adminpldt
Password: z6dUABtl270qRxt7a2uGTiw
may mali po ba ako dun?
I.C Tiempo says
Napalitan mo na ba ang password mo dati? Kung napalitan mo na, yun na yung gamitin mo. Ang firmware update ay hindi nag bura ng password na, na-set mo na dati.
Luis says
Naghard reset ako ng pldt fibr router so lahat balik sa default settings. naaccess ko ung superadmin pero ung adminpldt ayaw
ayaw tanggapin ung password ko din kahit ung old personalized password.
I.C Tiempo says
That’s strange Sir, kasi gumana naman sa akin.
Luis says
I just used Telnet and accessed it from there to get the password, ok na po 🙂
I.C Tiempo says
That’s nice, can you share the syntax you used?
Jhayb14 says
Gumana sakin yung last admin account ko before magupdate to RP2627. kung nakapagcreate ka ng admin account before sila magupdate, it should work.
I.C Tiempo says
Precisely, thanks for the confirmation.
Phillip Arcamo says
boss thank boss successful po siya boss.. na access ko na yung first tapos i enable ko sya tapos nag logout ako tapos ung 2nd naman chinange ko ung admin password nya tapos yun na nga na access ko na PLDT dashboard namin thanks po ng marami boss tsaka please po boss paki update nyu po kami lage kung may changes na naman ang PLDT boss thanks again boss…
mj says
5 GHZ stopped working. Tried hard reset, still no internet.
I was able to login via Admin user, re-enabled 5gHz but still no good
I.C Tiempo says
Sir, please contact PLDT about that issue for them to check it out or have it replaced.
lamryoso says
My 5g wifi suddenly stopped working. Tried this steps but it didn’t work for me
I.C Tiempo says
Hello Sir, please try other devices kung ganon din ba ang problema. Marami kasing devices ngayon na medyo incompatible sa 5G. In my experience, out of 6 mobile phones may isang hindi makakabasa ng 5G. However, if you are sure enough na ang 5G ang sira, you can call PLDT to fix it, or have your router replaced.
Jal says
No Acess Na..
I.C Tiempo says
I can still access my Fibr router but I received comments that some Fibr users who used to access their PLDT Fibr adminplt admin account before using the above information, can no longer access it now.
Ben says
Yes that is correct, I accessed it before and now it cannot be accessed.
I.C Tiempo says
In some areas na, na update na ang firmware ng iyong router to RP2631.
rap says
aYaw na mag login