How to access the PLDT Home Fibr Router’s Full admin account? It’s been a while since PLDT sent emails or letters to their subscribers, informing them about their policy changes. The letter stated that to access the root admin of PLDT Home Fibr’s Modem/Router. The subscriber must sign the waiver first.
Advertisements
However, many are skeptical about signing the waiver, that includes me. It is simply because the waiver is so advantageous for PLDT. You read it
PLDT Fibr ONU Users
The policy change may not affect all PLDT subscribers because not all subscribers are advanced users that care about the Modem’s root access or PLDT Fibr Router adminpldt. However, for those advanced users, it’s a significant loss.
As one of the advanced users that struggle to access the PLDT Home Fibr adminpldt account, I tried to call PLDT for help to access the PLDT Fibr’s root admin again but to no avail.
Advertisements
So, I did some research and found a workaround to access the PLDT Fiberhome ONU Router’s adminpldt without signing the PLDT Waiver. These are the steps you need to follow:
⚠ Important Note: This will work only on PLDT Fiberhome ONU Routers.
Access PLDT Fibr adminpldt
First, we need the following:
- Know your PLDT Fiberhome modem-router’s software version ➔ https://youtube.com/shorts/aPmmrCQ0hcc.
- The correct URL ➔ (http://192.168.1.1/fh) of the PLDT Fiberhome Modem router.
- PLDT Superadmin username and password according to your router’s software version.
- PLDT adminpldt username and password based on your router’s firmware or software version.
⚠ Please take note of the information on the list above. We will need that URL, usernames, passwords, and the correct software version of your router.
Advertisements
➊ Now, open a web browser; in the web address bar, type 192.168.1.1/fh, or click this 192.168.1.1/fh to open the PLDT web login page. As shown in the image below.
➋ Input the superadmin username and password according to your router’s software version, ➔ click the login button, or hit enter.
Enable Web Admin Switch
➌ Inside Device Management, select ➔ Debug Switch and Enable Web Admin Switch. Click ➔ Apply to save the changes ➔ Logout.
➍ In the web address bar, type or edit the URL from 192.168.1.1/login.html to 192.168.1.1/fh and Enter↩. Ensure that what you see on the web login page is Administrator and not Username, retype the URL 192.168.1.1/fh if necessary.
➎ On the login page, input adminpldt in the Administrator and the password according to your router’s software version. If you don’t know the password, check this link PLDT default adminpldt passwords. Then click login.
Congratulations!😉 You just accessed the adminpldt account of your PLDT Fibr Modem/Router. Do you find this post helpful? You are free to share this with your friends that encounter the same issue as yours.
⚠ Important: To access the adminpldt account, please always enable the Web Admin Switch first.
If you fail to do so, you will not be able to access your adminpldt account. Instead, you will encounter the “Admin Account Unavailable” error.
Lastly, please keep in mind that accessing the adminpldt account of your PLDT Home Fibr also means responsibility. Please do not abuse it; know your limits. If you are not the owner or the paying PLDT subscriber, you should restrain yourself from getting access to it.
aldrin says
May 14, 2019 at 2:51 am
hi!
i was able to enable “debug switch”..however it says “username or password” when i log to pldtadmin..i followed d instructions religiously..
I.C Tiempo says
If you are using black router, it seems that the password is not working as of this time.
Lukas says
Hi, Sir.
I did all the steps and was able to log in after enabling the web switch using the second uid and pw. However the interface is different and it is asking me to change the account password.
Thanks.
I.C Tiempo says
You can change the password as you like but you must remember it.
James says
The Second PLDT fibr acct u shared does not work anymore for me.
Opened the FIrst acc and then clicked the switch and clicked enable but it instantly reverts back to disabled.
I.C Tiempo says
Someone has the same issue as your but it was resolve by keep on trying. Please see to it that you checking the right radio button.
James says
The Second PLDT fibr acct u shared does not work anymore for me.
Opened the FIrst acc and then clicked the switch and clicked enable but it instantly reverts back to disabled.
I.C Tiempo says
Hi, try to clear your browser cache and try again.
Nel0608 says
Hi,
After ok na 2 logins, was asked to update the PW which I did for adminpldt.
While doing config na, logged out unexpectedly and new PW does not work for adminpldt.
Also tried the old one (long complex PW from the post) but not OK.
Paadvice please.
Nel says
Hi,
2nd PW does not work. Tried several times. Ensured entered the mention PW (long one)
I.C Tiempo says
Hello, I have this reports that if you are using the black version of ONU the passwords doesn’t work. I cannot find a way as of this time because I am using the White ONU with 4 WiFi antennas.
Gerald says
I also have the white modem/router and the second password did NOT work for me either, however the long numeric one still works.
What I need is to UNBLOCK port 80 so I can run my web site. It was working for awhile and then it STOPPED working, because I think of a firmware update from pldt.
A technician called me on MARCH 30 and said he would be at my house @ 3:00pm that day. I AM STILL WAITING!!!
I finally got a service ticket number so will have to see if anyone responds to that.