How to access the PLDT Home Fibr Router’s Full admin account? It’s been a while since PLDT sent emails or letters to their subscribers, informing them about their policy changes. The letter stated that to access the root admin of PLDT Home Fibr’s Modem/Router. The subscriber must sign the waiver first.
Advertisements
However, many are skeptical about signing the waiver, that includes me. It is simply because the waiver is so advantageous for PLDT. You read it
PLDT Fibr ONU Users
The policy change may not affect all PLDT subscribers because not all subscribers are advanced users that care about the Modem’s root access or PLDT Fibr Router adminpldt. However, for those advanced users, it’s a significant loss.
As one of the advanced users that struggle to access the PLDT Home Fibr adminpldt account, I tried to call PLDT for help to access the PLDT Fibr’s root admin again but to no avail.
Advertisements
So, I did some research and found a workaround to access the PLDT Fiberhome ONU Router’s adminpldt without signing the PLDT Waiver. These are the steps you need to follow:
⚠ Important Note: This will work only on PLDT Fiberhome ONU Routers.
Access PLDT Fibr adminpldt
First, we need the following:
- Know your PLDT Fiberhome modem-router’s software version ➔ https://youtube.com/shorts/aPmmrCQ0hcc.
- The correct URL ➔ (http://192.168.1.1/fh) of the PLDT Fiberhome Modem router.
- PLDT Superadmin username and password according to your router’s software version.
- PLDT adminpldt username and password based on your router’s firmware or software version.
⚠ Please take note of the information on the list above. We will need that URL, usernames, passwords, and the correct software version of your router.
Advertisements
➊ Now, open a web browser; in the web address bar, type 192.168.1.1/fh, or click this 192.168.1.1/fh to open the PLDT web login page. As shown in the image below.
➋ Input the superadmin username and password according to your router’s software version, ➔ click the login button, or hit enter.
Enable Web Admin Switch
➌ Inside Device Management, select ➔ Debug Switch and Enable Web Admin Switch. Click ➔ Apply to save the changes ➔ Logout.
➍ In the web address bar, type or edit the URL from 192.168.1.1/login.html to 192.168.1.1/fh and Enter↩. Ensure that what you see on the web login page is Administrator and not Username, retype the URL 192.168.1.1/fh if necessary.
➎ On the login page, input adminpldt in the Administrator and the password according to your router’s software version. If you don’t know the password, check this link PLDT default adminpldt passwords. Then click login.
Congratulations!😉 You just accessed the adminpldt account of your PLDT Fibr Modem/Router. Do you find this post helpful? You are free to share this with your friends that encounter the same issue as yours.
⚠ Important: To access the adminpldt account, please always enable the Web Admin Switch first.
If you fail to do so, you will not be able to access your adminpldt account. Instead, you will encounter the “Admin Account Unavailable” error.
Lastly, please keep in mind that accessing the adminpldt account of your PLDT Home Fibr also means responsibility. Please do not abuse it; know your limits. If you are not the owner or the paying PLDT subscriber, you should restrain yourself from getting access to it.
Ron says
April 26, 2019 at 3:44 am
Sir ok na po na access ko na..ask ko na lang pano i-enable wifi?
I.C Tiempo says
By default it is enabled but if not, you may go to “Network” and select “enable” radio button.
Donzzy says
Tried to enter adminpldt login credentials. We have the black modem for SME users.
It says Access Error: Site or Page Not Found
Cannot open URL
I.C Tiempo says
Your router modem is not in the lists above. You may call PLDT about your issue. The error simply says that the URL is not correct.
roseroie34 says
Hello sir hope you can answer my problem. I have opened my pldt router settings to change. I accidentally clicked on the RADIO ON and it was turned off and then I cant access it anymore. It won’t show up on my available connections too. When I try to access it using 192.168.1.1 it cannot be accessed. What I am to do to access it? Thank you in advance
I.C Tiempo says
Can you specify kung anong setting ang binuksan mo? naong account at URL ang gamit mo? We cannot give you a solution kung ang tanong mo ay malabo.
Allan says
hindi na gumagana yung 2nd password pero gumagana pa rin yung 1st.
I.C Tiempo says
Kung binasa niyo lang lahat ng nasa post na ito. Please read the post from the beginning till end para ma-intindihan ninyo. Hindi naman ito Facebook na scroll lang ng scroll, tutorial ito kaya every information is important.
kristeffer says
Baka naman yung url mo nakalagay “http://192.168.1.1/login.html”
kasi sa interface na yan lalabas is “Username” and “Password”.
Gawin mo “http://192.168.1.1/fh” pag nilagay mo fh ang lalabas is “Administrator” and “Password” tho ang lalabas sa URL is “http://192.168.1.1/login.html” parin, pero Superadmin na yung mallog in mo.
Kimo says
Good afternoon po, hindi po gumagama ung 2nd username/password for the 192.168.1.1/fh, where in administrator and password field ang meron. My router software is RP2658. Thank you po
I.C Tiempo says
Anong error ang lumalabas after mo ma input ang 2nd password?
Elwil Carbonel says
Hello po,pwede bang gamitin ang homefiber router as sub router or as secondary router?meron bang dapat iconfigure to make it working.?Thank you.
I.C Tiempo says
Pwede naman, kaso may eh set kapa na mga configuration. If you are using ONU as your secondary ROUTER, you have to change its I.P. address from 192.168.1.1 to any I.P addresses starting from 192.168.1.2 – 192.168.1.254 and disable the DHCP. To change the IP you can do it via “Network” -> “LAN setting”. To disable the DHCP, you may go to “Network” -> “DHCP Server” -> “DHCP Service” -> in the Type drop down menu select “disable”. Save and reboot or restart your router by turning it off and On again. DISCLAIMER: DO IT AT YOUR OWN RISK. I WILL NOT BE HELD LIABLE FOR ANY MISTAKE YOU MAKE AND DAMAGE IT MAY BRING TO THE ROUTER OR ANYTHING DIRECTLY OR INDIRECTLY.
Kristeffer says
Disabled na daw yung adminpldt na account sabi nung sa Tech Support nila, ayon daw yung nirerequest. Unavailable daw po kasi sir yung adminpldt kapag sinusubukan ko e. Bakit po kaya ganon?
kristeffer says
Yung gamit po namin na modem is AN5506-04-FA
and yung software version po is RP2627.
I.C Tiempo says
Hindi mo nasunod ng mabuti ang proseso. I just tried it today and it is working 100%.
Kristeffer says
You are trying to log in “adminpldt” account sa maling web interface.
Does it say “Username & Password” or “Administrator & Password”?
Super admin account yung adminpldt so dapat yung nakalagay is Administrator not Username.
Kristeffer says
WTF?! i just replied on my own comment. HAHAHAHA
Stupid Ass! Forgive me guys, im a bit retard lately. lol