How to access the PLDT Home Fibr Router’s Full admin account? It’s been a while since PLDT sent emails or letters to their subscribers, informing them about their policy changes. The letter stated that to access the root admin of PLDT Home Fibr’s Modem/Router. The subscriber must sign the waiver first.
Advertisements
However, many are skeptical about signing the waiver, that includes me. It is simply because the waiver is so advantageous for PLDT. You read it
PLDT Fibr ONU Users
The policy change may not affect all PLDT subscribers because not all subscribers are advanced users that care about the Modem’s root access or PLDT Fibr Router adminpldt. However, for those advanced users, it’s a significant loss.
As one of the advanced users that struggle to access the PLDT Home Fibr adminpldt account, I tried to call PLDT for help to access the PLDT Fibr’s root admin again but to no avail.
Advertisements
So, I did some research and found a workaround to access the PLDT Fiberhome ONU Router’s adminpldt without signing the PLDT Waiver. These are the steps you need to follow:
⚠ Important Note: This will work only on PLDT Fiberhome ONU Routers.
Access PLDT Fibr adminpldt
First, we need the following:
- Know your PLDT Fiberhome modem-router’s software version ➔ https://youtube.com/shorts/aPmmrCQ0hcc.
- The correct URL ➔ (http://192.168.1.1/fh) of the PLDT Fiberhome Modem router.
- PLDT Superadmin username and password according to your router’s software version.
- PLDT adminpldt username and password based on your router’s firmware or software version.
⚠ Please take note of the information on the list above. We will need that URL, usernames, passwords, and the correct software version of your router.
Advertisements
➊ Now, open a web browser; in the web address bar, type 192.168.1.1/fh, or click this 192.168.1.1/fh to open the PLDT web login page. As shown in the image below.
➋ Input the superadmin username and password according to your router’s software version, ➔ click the login button, or hit enter.
Enable Web Admin Switch
➌ Inside Device Management, select ➔ Debug Switch and Enable Web Admin Switch. Click ➔ Apply to save the changes ➔ Logout.
➍ In the web address bar, type or edit the URL from 192.168.1.1/login.html to 192.168.1.1/fh and Enter↩. Ensure that what you see on the web login page is Administrator and not Username, retype the URL 192.168.1.1/fh if necessary.
➎ On the login page, input adminpldt in the Administrator and the password according to your router’s software version. If you don’t know the password, check this link PLDT default adminpldt passwords. Then click login.
Congratulations!😉 You just accessed the adminpldt account of your PLDT Fibr Modem/Router. Do you find this post helpful? You are free to share this with your friends that encounter the same issue as yours.
⚠ Important: To access the adminpldt account, please always enable the Web Admin Switch first.
If you fail to do so, you will not be able to access your adminpldt account. Instead, you will encounter the “Admin Account Unavailable” error.
Lastly, please keep in mind that accessing the adminpldt account of your PLDT Home Fibr also means responsibility. Please do not abuse it; know your limits. If you are not the owner or the paying PLDT subscriber, you should restrain yourself from getting access to it.
Jamie Inguito says
March 15, 2019 at 10:55 pm
It helped me a lot. Nice one! Thank you
Lady C says
Perfect!!! thank you so much 🙂
Anne says
It work. In just one Try. Thanks a lot….
I.C Tiempo says
You are always welcome…
joann says
it wont work everything help
I.C Tiempo says
This is a proven method by myself but if it is not working on your end. Maybe, we have a different router.
joann says
i tried everything
though last time i already changed my password but now i was trying to change to password again but it dont work already
Gino says
meron ba tong option to check the ‘Wifi Client List’?
I.C Tiempo says
Yes Gino. Sa “status” tab then select “Wireless status”.
Maki says
Hi, I’ve already enabled web admin switch but the second password for adminpldt does not work. any tips on how to fix this? i badly need to enable port forwarding. thank you
I.C Tiempo says
Hello, we shared the same experience on my first attempt. But later I realized that I did access the adminpldt before and changed the password. So, that’s the reason why the default password is not working because I already set a new password. When I tried to use my password, I was able to access the Fibr adminpldt.However, if that is not your case, you may try to reset your Fibr router.