How to access the PLDT Home Fibr Router’s Full admin account? It’s been a while since PLDT sent emails or letters to their subscribers, informing them about their policy changes. The letter stated that to access the root admin of PLDT Home Fibr’s Modem/Router. The subscriber must sign the waiver first.
Advertisements
However, many are skeptical about signing the waiver, that includes me. It is simply because the waiver is so advantageous for PLDT. You read it
PLDT Fibr ONU Users
The policy change may not affect all PLDT subscribers because not all subscribers are advanced users that care about the Modem’s root access or PLDT Fibr Router adminpldt. However, for those advanced users, it’s a significant loss.
As one of the advanced users that struggle to access the PLDT Home Fibr adminpldt account, I tried to call PLDT for help to access the PLDT Fibr’s root admin again but to no avail.
Advertisements
So, I did some research and found a workaround to access the PLDT Fiberhome ONU Router’s adminpldt without signing the PLDT Waiver. These are the steps you need to follow:
⚠ Important Note: This will work only on PLDT Fiberhome ONU Routers.
Access PLDT Fibr adminpldt
First, we need the following:
- Know your PLDT Fiberhome modem-router’s software version ➔ https://youtube.com/shorts/aPmmrCQ0hcc.
- The correct URL ➔ (http://192.168.1.1/fh) of the PLDT Fiberhome Modem router.
- PLDT Superadmin username and password according to your router’s software version.
- PLDT adminpldt username and password based on your router’s firmware or software version.
⚠ Please take note of the information on the list above. We will need that URL, usernames, passwords, and the correct software version of your router.
Advertisements
➊ Now, open a web browser; in the web address bar, type 192.168.1.1/fh, or click this 192.168.1.1/fh to open the PLDT web login page. As shown in the image below.
➋ Input the superadmin username and password according to your router’s software version, ➔ click the login button, or hit enter.
Enable Web Admin Switch
➌ Inside Device Management, select ➔ Debug Switch and Enable Web Admin Switch. Click ➔ Apply to save the changes ➔ Logout.
➍ In the web address bar, type or edit the URL from 192.168.1.1/login.html to 192.168.1.1/fh and Enter↩. Ensure that what you see on the web login page is Administrator and not Username, retype the URL 192.168.1.1/fh if necessary.
➎ On the login page, input adminpldt in the Administrator and the password according to your router’s software version. If you don’t know the password, check this link PLDT default adminpldt passwords. Then click login.
Congratulations!😉 You just accessed the adminpldt account of your PLDT Fibr Modem/Router. Do you find this post helpful? You are free to share this with your friends that encounter the same issue as yours.
⚠ Important: To access the adminpldt account, please always enable the Web Admin Switch first.
If you fail to do so, you will not be able to access your adminpldt account. Instead, you will encounter the “Admin Account Unavailable” error.
Lastly, please keep in mind that accessing the adminpldt account of your PLDT Home Fibr also means responsibility. Please do not abuse it; know your limits. If you are not the owner or the paying PLDT subscriber, you should restrain yourself from getting access to it.
Kathy says
February 9, 2020 at 1:58 pm
Paano po ma access ulit ang Administrator Login? Gusto ko sana e enable ung SSID2 ko. Di na po kc makita Administrator Login sa 192.168.1.1/fh .. may ibang paraan pa po ba?
I.C Tiempo says
Please refer to this guide: How to access PLDT Fibr RP 2631.
Sam says
[* Shield plugin marked this comment as “Pending Moderation”. Reason: Human SPAM filter found “r http” in “comment_content” *]
Sir hindi na po ito gumagawa since port 443 na ang open at closed na ang port 80. Sa port 80 or http lang po ito gumagana at hindi sa port 443 or https.
I.C Tiempo says
Check this out: How to access PLDT Fibr RP231
tom says
First or Superadmin PLDT Fibr username: fiberhomesuperadmin
First or Superadmin PLDT Fibr password: sfuhgu
tom says
its not working T_T
Dustin says
Sir, WLAN Settings lang yung nalabas sa dashboard ko under network. May need pa po ba ko gawin para lumabas sya? Thanks Sir
I.C Tiempo says
Ano po ba ang gusto niyong gawin?
Dustin says
I-unbind ko sana Sir yung mga LAN port. Isa lang po kasi active sa kanya ngayon
tecofoj says
error username or password sakin sir nung sinubukan ko yung 6GFJdY4aAuUKJjdtSn7dC2x na password kahit yung z6dUABtl270qRxt7a2uGTiw enabled ko na po yung web admin access yung sa second username and password lang po hindi maka log in
I.C Tiempo says
Please re-type the 192.168.1.1/fh after you logout and enable the web admin switch from Debug switch.
rnel says
Sir, anu po gagawin kung pag click mo sa debug switch and lumalabas is “192.168.1.1 says your session is timed out”?
I.C Tiempo says
Please clear your browser cache and try again.