How to access the PLDT Home Fibr Router’s Full admin account? It’s been a while since PLDT sent emails or letters to their subscribers, informing them about their policy changes. The letter stated that to access the root admin of PLDT Home Fibr’s Modem/Router. The subscriber must sign the waiver first.
Advertisements
However, many are skeptical about signing the waiver, that includes me. It is simply because the waiver is so advantageous for PLDT. You read it
PLDT Fibr ONU Users
The policy change may not affect all PLDT subscribers because not all subscribers are advanced users that care about the Modem’s root access or PLDT Fibr Router adminpldt. However, for those advanced users, it’s a significant loss.
As one of the advanced users that struggle to access the PLDT Home Fibr adminpldt account, I tried to call PLDT for help to access the PLDT Fibr’s root admin again but to no avail.
Advertisements
So, I did some research and found a workaround to access the PLDT Fiberhome ONU Router’s adminpldt without signing the PLDT Waiver. These are the steps you need to follow:
⚠ Important Note: This will work only on PLDT Fiberhome ONU Routers.
Access PLDT Fibr adminpldt
First, we need the following:
- Know your PLDT Fiberhome modem-router’s software version ➔ https://youtube.com/shorts/aPmmrCQ0hcc.
- The correct URL ➔ (http://192.168.1.1/fh) of the PLDT Fiberhome Modem router.
- PLDT Superadmin username and password according to your router’s software version.
- PLDT adminpldt username and password based on your router’s firmware or software version.
⚠ Please take note of the information on the list above. We will need that URL, usernames, passwords, and the correct software version of your router.
Advertisements
➊ Now, open a web browser; in the web address bar, type 192.168.1.1/fh, or click this 192.168.1.1/fh to open the PLDT web login page. As shown in the image below.
➋ Input the superadmin username and password according to your router’s software version, ➔ click the login button, or hit enter.
Enable Web Admin Switch
➌ Inside Device Management, select ➔ Debug Switch and Enable Web Admin Switch. Click ➔ Apply to save the changes ➔ Logout.
➍ In the web address bar, type or edit the URL from 192.168.1.1/login.html to 192.168.1.1/fh and Enter↩. Ensure that what you see on the web login page is Administrator and not Username, retype the URL 192.168.1.1/fh if necessary.
➎ On the login page, input adminpldt in the Administrator and the password according to your router’s software version. If you don’t know the password, check this link PLDT default adminpldt passwords. Then click login.
Congratulations!😉 You just accessed the adminpldt account of your PLDT Fibr Modem/Router. Do you find this post helpful? You are free to share this with your friends that encounter the same issue as yours.
⚠ Important: To access the adminpldt account, please always enable the Web Admin Switch first.
If you fail to do so, you will not be able to access your adminpldt account. Instead, you will encounter the “Admin Account Unavailable” error.
Lastly, please keep in mind that accessing the adminpldt account of your PLDT Home Fibr also means responsibility. Please do not abuse it; know your limits. If you are not the owner or the paying PLDT subscriber, you should restrain yourself from getting access to it.
juanita says
November 13, 2019 at 12:55 pm
naaccess ko yung bagong fiberhomesuperadmin na username pero pag inenable ko na yung debug switch and use the secondary username and password, hindi na po gumagana. Any help?
I.C Tiempo says
Try the telnet stuff. How to access PLDT Fibr using TelNet
Juanita says
[* Shield plugin marked this comment as “Pending Moderation”. Reason: Human SPAM filter found “dont know” in “comment_content” *]
Hello, thanks for your information. Pero hindi po sya gumana sakin. whenever I use the adminpldt… yung Login nagiging not clickable… few months before gumagana pa yung admin password na katulad sa binigay mo pero now hindi na. I dont know why. Any idea?
I.C Tiempo says
It means the password is wrong. You may check our update: How to access PLDT Fibr Router RP2631 version
Emerson baisas says
Need help i forfot my username and password to the pldt fiber..how can i access again? I want to change the password of my router..
Anonymous says
Hi! What if my software version is 2613?
I.C Tiempo says
Parang yan ang bago nialng black modem if I’m not mistaken. Wala pa tayong acces diyan.
Laurence says
Do we have update na sa Ver 2613?
Diane says
This does not work anymore. Any updates?
I.C Tiempo says
This will be the last time na mag reply ako sa katulad nitong comment. Please read the post carefully. Thank you…
rey says
bakit ayaw na po ma access debug switch dati na open ko po yun. pa helf naman po
I.C Tiempo says
Please see the update link in this post.