How to access the PLDT Home Fibr Router’s Full admin account? It’s been a while since PLDT sent emails or letters to their subscribers, informing them about their policy changes. The letter stated that to access the root admin of PLDT Home Fibr’s Modem/Router. The subscriber must sign the waiver first.
Advertisements
However, many are skeptical about signing the waiver, that includes me. It is simply because the waiver is so advantageous for PLDT. You read it
PLDT Fibr ONU Users
The policy change may not affect all PLDT subscribers because not all subscribers are advanced users that care about the Modem’s root access or PLDT Fibr Router adminpldt. However, for those advanced users, it’s a significant loss.
As one of the advanced users that struggle to access the PLDT Home Fibr adminpldt account, I tried to call PLDT for help to access the PLDT Fibr’s root admin again but to no avail.
Advertisements
So, I did some research and found a workaround to access the PLDT Fiberhome ONU Router’s adminpldt without signing the PLDT Waiver. These are the steps you need to follow:
⚠ Important Note: This will work only on PLDT Fiberhome ONU Routers.
Access PLDT Fibr adminpldt
First, we need the following:
- Know your PLDT Fiberhome modem-router’s software version ➔ https://youtube.com/shorts/aPmmrCQ0hcc.
- The correct URL ➔ (http://192.168.1.1/fh) of the PLDT Fiberhome Modem router.
- PLDT Superadmin username and password according to your router’s software version.
- PLDT adminpldt username and password based on your router’s firmware or software version.
⚠ Please take note of the information on the list above. We will need that URL, usernames, passwords, and the correct software version of your router.
Advertisements
➊ Now, open a web browser; in the web address bar, type 192.168.1.1/fh, or click this 192.168.1.1/fh to open the PLDT web login page. As shown in the image below.
➋ Input the superadmin username and password according to your router’s software version, ➔ click the login button, or hit enter.
Enable Web Admin Switch
➌ Inside Device Management, select ➔ Debug Switch and Enable Web Admin Switch. Click ➔ Apply to save the changes ➔ Logout.
➍ In the web address bar, type or edit the URL from 192.168.1.1/login.html to 192.168.1.1/fh and Enter↩. Ensure that what you see on the web login page is Administrator and not Username, retype the URL 192.168.1.1/fh if necessary.
➎ On the login page, input adminpldt in the Administrator and the password according to your router’s software version. If you don’t know the password, check this link PLDT default adminpldt passwords. Then click login.
Congratulations!😉 You just accessed the adminpldt account of your PLDT Fibr Modem/Router. Do you find this post helpful? You are free to share this with your friends that encounter the same issue as yours.
⚠ Important: To access the adminpldt account, please always enable the Web Admin Switch first.
If you fail to do so, you will not be able to access your adminpldt account. Instead, you will encounter the “Admin Account Unavailable” error.
Lastly, please keep in mind that accessing the adminpldt account of your PLDT Home Fibr also means responsibility. Please do not abuse it; know your limits. If you are not the owner or the paying PLDT subscriber, you should restrain yourself from getting access to it.
nereusd3rd says
October 4, 2019 at 3:56 pm
sir meron ba bagong paraan para ma access ko debug switch? sablay po ako eh.. sinunod ko naman instructions.. gusto ko sana mag forward ng ports. any advice po?
I.C Tiempo says
Have you tried the RP2631 at telnet guides? How to access PLDT Fibr using TelNet & How to access PLDT Fibr Router RP2631 version
AP says
Seems like the password for ONU router no longer works.
http://192.168.1.1/fh – this is the IP address of ONU Modem router or the URL we need to get the user interface of our PLDT Fibr Modem.
First PLDT Fibr username: fiberhomesuperadmin
First PLDT Fibr password: sfuhgu
Second PLDT Fibr username: adminpldt
Second PLDT Fibr password: 6GFJdY4aAuUKJjdtSn7dC2x
I.C Tiempo says
Indeed, hindi na yan working. Please read the post carefully to see the updates.
carl says
Sir, did the entire process but i dont seem to have the same results as the one in your screenshot. its as if nothing happened
I.C Tiempo says
Please specify the error you received. You may also try the RP2631 tutorials.
Marlon John Cruz says
Sir pano ko po ba papalitan ang user name tsaka password ng pldthomefibr bagong kabit lng kasi
I.C Tiempo says
Just access the router’s I.P. 192.168.1.1 or 192.168.1.1/fh
Love says
Sir kagabi sinunod ko po yung instructions sa taas. Nabuksan ko naman po. Nag instruct pa nga yun pagbukas ko gamit yung username na adminpldt na i change password ko. Pinalitan ko po at sabi successful naman. Ngayon po pagbukas ko account unavailable na po nakalagay, ano po nangyari ?
I.C Tiempo says
Walang kang nagawang mali Mam Love (I just assumed that you are a girl). Please enable the “web admin switch” again. Kung nabasa po ninyo ang mga note ko dito sa article, na ang “web admin switch” ay nag automatically disabled after a certain period of time. In my experience every 3 to 4 hours nag disable ang web admin switch.
Anna says
sir patulong naman, ano po ba use kung maaccess itong admin site?
ask ko lang mabagal po router ko hindi ko alam baka sa basic router setting lang ba? may way ba para pabilisin wifi namin?
I.C Tiempo says
Ano ba ang plan ng Fibr mo?