How to access the PLDT Home Fibr Router’s Full admin account? It’s been a while since PLDT sent emails or letters to their subscribers, informing them about their policy changes. The letter stated that to access the root admin of PLDT Home Fibr’s Modem/Router. The subscriber must sign the waiver first.
Advertisements
However, many are skeptical about signing the waiver, that includes me. It is simply because the waiver is so advantageous for PLDT. You read it
PLDT Fibr ONU Users
The policy change may not affect all PLDT subscribers because not all subscribers are advanced users that care about the Modem’s root access or PLDT Fibr Router adminpldt. However, for those advanced users, it’s a significant loss.
As one of the advanced users that struggle to access the PLDT Home Fibr adminpldt account, I tried to call PLDT for help to access the PLDT Fibr’s root admin again but to no avail.
Advertisements
So, I did some research and found a workaround to access the PLDT Fiberhome ONU Router’s adminpldt without signing the PLDT Waiver. These are the steps you need to follow:
⚠ Important Note: This will work only on PLDT Fiberhome ONU Routers.
Access PLDT Fibr adminpldt
First, we need the following:
- Know your PLDT Fiberhome modem-router’s software version ➔ https://youtube.com/shorts/aPmmrCQ0hcc.
- The correct URL ➔ (http://192.168.1.1/fh) of the PLDT Fiberhome Modem router.
- PLDT Superadmin username and password according to your router’s software version.
- PLDT adminpldt username and password based on your router’s firmware or software version.
⚠ Please take note of the information on the list above. We will need that URL, usernames, passwords, and the correct software version of your router.
Advertisements
➊ Now, open a web browser; in the web address bar, type 192.168.1.1/fh, or click this 192.168.1.1/fh to open the PLDT web login page. As shown in the image below.
➋ Input the superadmin username and password according to your router’s software version, ➔ click the login button, or hit enter.
Enable Web Admin Switch
➌ Inside Device Management, select ➔ Debug Switch and Enable Web Admin Switch. Click ➔ Apply to save the changes ➔ Logout.
➍ In the web address bar, type or edit the URL from 192.168.1.1/login.html to 192.168.1.1/fh and Enter↩. Ensure that what you see on the web login page is Administrator and not Username, retype the URL 192.168.1.1/fh if necessary.
➎ On the login page, input adminpldt in the Administrator and the password according to your router’s software version. If you don’t know the password, check this link PLDT default adminpldt passwords. Then click login.
Congratulations!😉 You just accessed the adminpldt account of your PLDT Fibr Modem/Router. Do you find this post helpful? You are free to share this with your friends that encounter the same issue as yours.
⚠ Important: To access the adminpldt account, please always enable the Web Admin Switch first.
If you fail to do so, you will not be able to access your adminpldt account. Instead, you will encounter the “Admin Account Unavailable” error.
Lastly, please keep in mind that accessing the adminpldt account of your PLDT Home Fibr also means responsibility. Please do not abuse it; know your limits. If you are not the owner or the paying PLDT subscriber, you should restrain yourself from getting access to it.
Era says
July 8, 2019 at 4:19 am
Hi sir, what if d po nagana ang adminpldt passwords? even the 1234567890 is not working
I.C Tiempo says
Sa post na itoh hindi po 1234567890 ang gamit at gagamitin. Try to ask sa may ari ng router.
Kenneth Melvin Padilla Abad says
hi sir the first pldt username and password is invalid now
I.C Tiempo says
Anong gamit mong password?
Chemiel says
Boss paano naman po sa may wifi/router namin, Model:HG6245D
Help me po gusto ko lang naman po bawasan ung wifi range namin ty, at gusto ko rin lang naman po mag block ng mac address , dami kasing hackers ngaun , ayon lang po ty.
I.C Tiempo says
As of this time wala pa po tayong update sa ganyang model.
Chemiel says
Boss if ever na kung meron na po , reply back nalang or pm me nalang through my g-mail ko po ty.
Carl says
Hi sir, thanks for the update. For some reason not working ang z6dUABtl270qRxt7a2uGTi na pass. Is there a new updated password?
I.C Tiempo says
Did you change your password before the update? If so, use your old password before the firmware update took place.
Darko says
Second password doesn’t work, sir.
Nelz says
hello!! Sir, gusto ko rin sana mapalitan SSID at PASSWORD kaso may intial log in tapos pag nilagay ko ung ORIGINAL SSID sa slot nakalagay ILLEGAL ENTRY. meron po bang step by step kc ndi ko mapasok ung mismong PAGE para dun baguhin ang SSID at PASSWORD ng wifi. SALAMAT..
I.C Tiempo says
Sino pa ang may access sa router niyo? Ask mo nalanag ang password Nelz. Pwedi mo ma configure ang SSID at password using the basic admin, “admin & 1234”. It should work.